Technical Information Metrohm NIRS Analyzer Pro Typical Performance

The Metrohm NIRS Analyzer Pro is one of the fastest spectrometers on the market with an acquisition time below 1

s. The NIRS PRO is designed to perform in chal enging industrial environments thanks to its rugged enclosure. Indi-cated below is the typical performance of the NIRS Pro as measured with standard materials placed in the analyzer and at sample interface.

Parameter

Wavelength Range (nm) 1 100–1 650

Detector

Indium Gal ium Arsenide (InGaAs) Diode Array Spectral dispersion (nm/pixel) 1.1

5–50 ms / integration time; depends upon sample.

Analysis Time

Typical result time: 1–15 seconds Wavelength Accuracy (nm) 0.5

Wavelength Precision (nm)

< 0.02

Wavelength Stability (nm/°C)

< 0.01

Bandwidth (nm)

9.5

Noise (μAu)

< 60

Absorbance

0–1.5

Lifetime of the light source (h) Dual lamp system MTBF = 17,500

0.4 Grms at 10–150 Hz in accordance with IEC 60068-2-64

Random vibrations (Grms) 0.4 Grms at 10–1 250 Hz in accordance with international Metrohm standard (additional information available on request)

NIRS Pro Process Analyzer Installation Information Metrohm NIRS Analyzer Pro NIRS Pro analyzers are designed to provide precise and accurate results while operating in harsh environments.

Please observe the fol owing guidelines when selecting and instal ing your NIRS Pro instrument.

Site Requirements

Operating Temperature Range

-5–40 °C (23–104 °F)

with Purge

-5–65 °C (23–149 °F)

Cooling air flow rate minimum 5 L/min Purge flow rate

> 99.9% water free

> 99.9% free of oil and fine particles down to 0.3 μm Relative Humidity

10–90% RH, non-condensing IP 69K

Ingress Protection

according to IEC 60529 and DIN 40050 part 9, NT ELEC 023

Enclosure certification ATEX 20 ready

Enclosure material

1.5 mm (lid 2.5 mm) stainless steel EN 1.4301 (SS2333) Weight

25 kg (55 lbs)

Dimensions (w × h × d) 420 × 420 × 130 mm (17” × 17” × 5”) Network Connections

Local Area Network (LAN) – Ethernet, RJ-45 connection Process Communication Options Digital Protocols

MODBUS (TCP/IP or Serial), PROFIBUS

VISION I/O Module

12 Analog Outputs, 12 Digital Inputs, 12 Digital Outputs OPC

USB or paral el port dongle Electrical Requirements Power Supply

Isolated or conditioned supply line Operating Voltage

100–240 VAC

Current

2 A

Power Consumption

150 W

V.

www.metrohm.com

ohm Applikon B.

Subject to modifications Designed by Alyson Lanciki, Metr 8.928.5006EN – 2018-08