CIC-Touch

65

0.26 CLEANROOM-INFORMATION-CENTER / DISPLAY FOR CLEAN

ROOM AIR PARAMETERS WITH COLOUR TOUCH SCREEN

General information

60

0.24

The new multi display for clean suitable design, the installation room air parameters such as air depth is very low and hence the humidity, temperature, differential unit fits in all current clean room pressure and particles allows walls. The smooth front panel 55

0.22 to check at a glance the actual complies with the demands of climatic parameters in clean clean room design, is therefore rooms. The online data are ideal to be cleaned and has no provided by external sensors edges subject to be polluted by and/or contact relays.

dust or any dirt.

50

0.20

Besides the actual measurement Another highlight of the CIC-value, which is shown with the Touch is the connectivity such respective unit (e.g. temperature, as analogue/digital interfaces, humidity etc.) and measurement contact relays, ethernet, USB, 45

0.18 location, also the backlight colour Modbus, RS-232, RS-485 and a changes according to the actual SD card. The CIC-Touch can be status. Green colour for values easily connected to any external within the threshold and red colour sensor and also integrated in if the threshold is exceeded.

40

0.16

existing monitoring systems.

The CIC-Touch display can be The display configuration is easily mounted in clean room performed via the intuitive walls without the need of any operation and configuration screws. The unit can be placed menu.

35

0.14 in a wall cavity, snapped in and fixed with clips, which are part The CIC-Touch can also be of the display unit itself. Thanks factory configured for specific to the consequent clean room OEM applications.

30

0.12

Advantages

Applications

NOVELTY!

 Semi-flush with the wall, no Measurement value and status 25

0.10

sharp edges, front panel only display of actual climatic para-2 mm thickness

meters and/or access control in clean rooms:

 Easy to clean thanks to flat and smooth touch screen

 Clean rooms in the semicon-ductor and pharmaceutical surface

20

0.08

industry

 Low installation depth and

 Isolators

ideal for integration in all

 Laminar flow benches

4 parameters at a glance

current clean room walls

 Hospitals, operating rooms

 Snap-in mounting without 15

0.06

any screws

 Laboratories, calibration rooms

 Display of up to 4 parameters at the same time

 Specific OEM solutions

 Status display with status and many more...

10

0.04

backlight colour (red/green)

 Easy configuration by intuitive configuration menu

 Several integrated communi-5

0.02

cation interfaces

0 Pa

0 in H 0

2

Techncal data see overleaf





Technical data

Type

CIC-Touch clean room display

Part no.

260 0941

Display

graphical display 3,5“ TFT display (70 x 52 mm) Operation

touch-screen

Dimensions front panel

150 x 120 mm (H2O2 resistant) Mounting dimensions

height 127 x width 107 x depth 50 mm (incl. connectors) Power consumption

12 VA

Power supply

24 V AC/DC

Operating temperature

-10 to +50°C

Inputs

4 x digital inputs



4 x 0/4-20 mA or 0-10V analogue inputs Outputs

2 x relay contacts 230V

Digital interfaces

ethernet



Modbus (RS-485)

USB connectivity

standard PC compatible

Memory

for firmware and configuration on SD card (no data logging) Tests

CE conformity

Recommended ambient sensors



Air humidity and temperature:

- HygroDat 100 process transmitter with remote sensor (accuracy +/- 0.5%RH and +/- 0.2K)



- HygroMaxx S/R/M versions, HVAC transmitter (accuracy +/- 1.5%RH and +/- 0.5K)

- TempMaxx (only temperature) with remote sensors (accuracy depending on sensor specification) Differential pressure:

- Pascal-ST/Z process transmitter (accuracy +/- 0.1% of full scale)



- PascalMaxx HVAC transmitter (accuracy +/- 0.5% of full scale) HygroMaxx S/R/M

HVAC transmitter

HygroDat 100

TempMaxx with remote process transmitter

temperature sensor

PascalMaxx

004521.00

Pascal-ST/Z

HVAC transmitter

process transmitter

technical data subject to changes without notice Novasina AG, Neuheimstrasse 12, CH-8853 Lachen, Switzerland Phone +41-55-642 67 67, Fax +41-55-642 62 70, e-mail: info@novasina.ch, www.novasina.com