Technical Specification The perfect solution for all your laboratory needs PURELAB® Quest offers you the most advanced, affordable water specification available today, delivering all three types of lab water directly from tap water input. The Complete Water Specification Space Saving Design Whether you require ultrapure (Type I) water for Measuring at only 232mm in width, the compact high performance liquid chromatography (HPLC) design can be wall mounted or placed on a bench to & molecular biology techniques; pure water (Type II) for easily fit into any laboratory - optimising valuable lab. media preparation & general chemistry or RO (Type III) space. water for glassware washing & autoclaves; PURELAB Quest dispenses water for the widest range Reduced Environmental Impact of applications in a single elegant system. PURELAB Quest is made from more than 85% * reclaimed materials. It is designed to reduce the Reliable environmental impact of your laboratory. PURELAB Quest has multiple quality sensors to constantly monitor both ultrapure and pure water; Simple inbuilt periodic recirculation to minimise biofilm build up and optional point of use filters. It uses tried and PURELAB Quest is simple to install, operate and has tested core components from over a decade of user a pre-programmed annual sanitisation process to experience and has been robotically tested to achieve minimize downtime. more than 150,000 dispensing cycles. Data Capture With PURELAB Quest, data capture is via a USB port which is useful for capturing water parameters, Flow process PURELAB® Quest UV software updates & diagnosing certain faults/issues. Quest is also IOT enabled with from Veolia. Remote Dispenser Connection loop Return port 6 Out port 7 Port 5 Type III water Dispenser Reverse 185/254 nm Purication Osmosis Reservoir UV Lamp Pack 18.2MΩ Type I water Water Purity and Water Purity and Temperature Temperature Sensor Sensor Recirculation Port 1 Pump feedwater inlet Port 4 Type II water * Materials not in contact with purification process 1 Demand more Water Specification International conformity Technical Specifications PURELAB® Quest UV PURELAB® Quest Ultrapure (Type I) water specifications (from fixed dispense point) Type I, II Resistivity 18.2 MΩ.cm @ 25°C 18.2 MΩ.cm @ 25°C & III Water Dispense flow rate Up to 1.2l/min Up to 1.2l/min TOC <5 ppb <30 ppb K E Y F E A T U R E S Bacterial TVC <0.1 cfu/ml*1 <0.1 cfu/ml*1 • Tap to Ultrapure, Pure & RO water Endotoxin <0.001 EU/ml*2 <0.001 EU/ml*2 • Multiple water purity sensors RNases <1pg/ml N/A • Fully recirculating • 232mm in width DNases <5pg/ml N/A • Bench top or wall mounted pH Effectively Neutral Effectively Neutral • Data Capture and IoT with AQUAVISTA from Veolia Particulates 0.2µm filtration*1 0.2µm filtration*1 Recommended daily volume Up to 10l/day*3 Up to 10l/day*3 I D E A L L Y S U I T E D F O R : Pure (Type II) water specifications (Outlet port 4) • Liquid Chromatography • Mass Spectrometry Resistivity > 1 MΩ.cm @ 25°C > 1 MΩ.cm @ 25°C • Atomic Spectroscopy TOC <50 pbb <50 pbb • Molecular Biology • Immunochemistry Bacterial TVC <100 cfu/ml <100 cfu/ml • Media/Buffer preparation Recommended daily volume Up to 10 l/day*3 Up to 10 l/day*3 • Autoclaves • Washing / Rinsing • Hydroponics 3 Demand more Water Specification International conformity Feedwater Pressure and Flow Rates Feedwater Flowrate Up to 75L/hr Technical Specifications PURELAB® Quest UV PURELAB® Quest Mains Drain Requirements > 90L/hr RO-permeate (Type III) water specifications (Outlet Port 5) Minimum Inlet Pressure 2 bar (30 psi) Conductivity <20 µS/cm*4 <20 µS/cm*4 Maximum Inlet Pressure 6 bar (30 psi) TOC <200 ppb*4 <200 ppb*4 Optimum Inlet Pressure Regulate to 4 bar (LA512) Bacterial TVC <1000 cfu/ml*4 <1000 cfu/ml*4 Ionic rejection >96%*5 >96%*5 Pipe Connections Particulates and Bacteria rejection >99% >99% Inlet 8mm (5/16) OD Tube Organic rejection (MW > 200 Da) >99% >99% Outlet 8mm (5/16) OD Tube Production flow 10l/hr*5 10l/hr*5 Drain 8mm (5/16) OD tube Daily volume Up to 30l/ day Up to 30l/ day Reservoir Outlets 8mm (5/16) OD tube Reservoir Overflows 8mm (5/16) OD tube Feedwater Specifications Water Source (Potable Water Source) Technical Specifications PURELAB® Quest UV PURELAB® Quest Conductivity <2000 µS/cm (High conductivity feedwaters may lower purification Electrical Requirements pack life and raise Type III water conductivity) Main Input 100-240VAC, 50–60Hz 100-240VAC, 50–60Hz Hardness <350 ppm as CaCO3 Power Required 24 V DC 24 V DC Free Chlorine <0.05 ppm Cl2 Power Consumption 120 VA 120 VA Chloramine <0.02 ppm Cl2 Noise Output dBA - <40 dBA - <40 Total Chlorine <0.05 ppm Cl2 Silica <30 ppm SiO2 Installation Carbon Dioxide (CO ) <30 ppm (Recommended <20 ppm) 2 Worktop Fouling Index <10 Wall-mounted Iron/Manganese <0.5 ppm Fe/Mn TOC (Total Organic Carbon) Recommended <2ppm Dimensions and Weights Dispatch Weight 19.6kg 18.5kg Environment Operational Weight 23kg 21.4kg Temperature 4–40°C (Recommended 10–25°C) Height 510mm (20.07”) Height 510mm (20.07”) Humidity Non-condensating. Humidity Max 80% Dimensions Weight 232mm (9.133”) Weight 232mm (9.133”) Surroundings Clean laboratory environment Depth 421mm (16.57") Depth 421mm (16.57") *1 When using point of use filters (LC134/LC145/LC197) *4 Subject to suitable feedwater purity (see ionic rejection) and system maintenance 5 *2 When using point of use filter(LC197) *5 With feedwater pressure at > 4 bar and temperature at 15ºC Demand more *3 Available volume of Type I and II water combined; increased use will reduce purification pack life Dedicated to Discovery info@elgalabwater.com / www.elgalabwater.com ELGA Labwater are specialists in the engineering, service & support of water purification systems. Unrivalled product design has achieved international recognition and awards. Worldwide technical service teams support science & healthcare globally with specialist expertise. Global digital performance monitoring from ensures laboratory work is uninterrupted. A global supply chain supports clients from regional centres on every continent. To find your nearest ELGA representative, go to www.elgalabwater.com and select your country for contact details. Elga Global Operations Centre. tel: +44 (0) 203 567 7300 fax: +44 (0) 203 567 7205 OVER 70 I NTERNATIONAL PATENTS ELGA is the global laboratory water brand name of Veolia. The information contained in this document is the property of VWS (UK) Ltd, trading as ELGA LabWater, and is supplied without liability for errors or omissions. © VWS (UK) Ltd. 2020 - All rights reserved. ELGA® and MEDICA® are registered trademarks of VWS (UK) Ltd. POO5_Quest_Launch_February2020