Instruments for electrochemical research Dedicated to research 2 Metrohm Autolab sets the standard for electrochemistry instrumentation. Over 30 years ago, we created the first commercially available digital potentiostat/galvanostat that was completely computer controlled. Today our NOVA software is the most powerful electrochemistry software on the market. Metrohm Autolab creates instruments that are suitable for most application areas including: corrosion, energy, environmental, sensors, and solar. Our customers may not always be electrochemists, but they are engaged in fundamental and applied research harnessing the power of electrochemistry for further understanding. They are driven to understand and improve electrochemical processes with the ambition to deliver new materials with superior properties and future possibilities. With an Autolab potentiostat/galvanostat and NOVA software there are no limits to where your research can go. Reliability Versatility • Metrohm Autolab’s integrated testing process • Metrohm Autolab instruments are the ensures that each component is traceable and workhorses of electrochemical research tested individually after installation in the delivering the requirements of most instrument. application areas with our range of • Metrohm Autolab instruments undergo up to instruments, modules and accessories. 405 quality checks during the manufacturing • Modular instruments allow you to change and process. expand the functionality of your instrument. • Our installed instruments average 99% uptime • Specialist modules can be installed to provide in the first 5 years of installation.* additional electrochemical measurements and possibilities as your research progresses. Superior Service Powerful software • Metrohm Autolab provides an industry-leading • NOVA is the powerful data acquisition and 3 year warranty for all its instruments, modules analysis software that powers your experiment. and instrument accessories. • Essential procedures and multiple analysis • Our dedicated distribution and service options are built-in with the ability to modify network provide a fast response for sales and and create your own. service, usually within 48 hours. • NOVA helps maximize your laboratory • Our colleagues are people you can trust to throughput with useful features that put the understand your requirements and provide focus on safety and production. solutions to support your research objectives. Metrohm Autolab is a member of the Metrohm Group, manufacturers of high-precision instruments for chemical analysis. *Based on European markets most widely sold instrumentation. Versatile instruments for electrochemical research Metrohm Autolab instruments 3 Modular Multichannel Compact instruments instruments instruments The Modular instrument For laboratories that require If space is at a premium family provides limitless multiple workstations for in your laboratory, or possibilities for your parallel measurements or you are establishing your electrochemical research when replication, with the versatility electrochemistry workstation, combined with our versatile of a modular instrument, the our range of compact range of modules. Multichannel instrument instruments will get you family meets your needs. You started. While small in size can customize the 12 instrument the PGSTAT204 allows you to channels for your unique add one module for maximum experimental requirements versatility. by mixing and matching potentiostat/galvanostats and modules (a maximum of 6). Instrument options: Instrument options: Instrument options: PGSTAT128N, PGSTAT302N MultiAutolab M101, M204 PGSTAT101, PGSTAT204 Metrohm Autolab develops and manufactures Potentionstat/Galvanostat instruments. Instrument Accessories In addition to the instruments and modules that create a tailored workstation for your research, Autolab also offer a range of high-quality instrument accessories. You can be assured that all accessories meet Autolab’s rigorous standards for reliability and are included in our warranty guarantee. Examples include: • Autolab Microcell HC • Faraday cage • Rotating disk electrode (RDE) • Corrosion cells • Optical bench • Rotating ring disk electrode (RRDE) • Electronic load interfaces • VA Stand • UV/VIS Spectrophotometers Find Metrohm Autolab’s range of specialist application notes - check out our Application Finder. www.metrohm.com/ applications PGSTAT302N with ADC10M, SCAN250, FRA32M, and ECI10M modules. Create your own tailored workstation Metrohm Autolab Modules 4 Electrochemical With the FRA32M module you can use EIS to quantify all elements of your impedance electrochemical system. The module gives you a wide frequency range (10 μHz to spectroscopy 1 MHz) and with the NOVA software you can have complete data analysis (fi t and module (FRA32M) simulation) available within a click. The module also maximizes the resolution of measurements with the Automatic Amplitude Correction algorithm (AAC) providing accurate impedance measurements. High frequency The ECI10M is ideal for solid state electrochemistry with expanded impedance measureable range for EIS to a maximum of 10 MHz and ultra-fast reaction spectroscopy mechanism for greater insight into the electrochemical interface. With a small (ECI10M) form factor it is suitable for your lab bench, Faraday cage or glovebox. True analog scan A true analog scan generator module is exactly what it sounds like - generator module up to 250kV/s† allows you to measure fast reaction rates, reaction (SCAN 250) kinetics, reversibility of electrochemical processes. Dual-channel ultra- The Autolab ADC10M captures ultra-fast surface reactions by increasing the fast sampling sample rate down to a 100 ns interval for 2 signals. module (ADC10M) Dual-mode With the Autolab Dual-mode bipotentiostat module (BA) you can design bipotentiostat experiments that use 2 independently controlled working electrodes in the module (BA) same electrochemical cell. Using either fi xed potential or the scanning mode you can expand your exploration in a convienient setup. Booster 10A/20A Give your current a boost with the Autolab Booster expanding your application options including electrochemical impedance (EIS) measurements when used with a FRA32M. The fast response time coupled with four quadrant operation* will give you detailed data that you can analyze for greater insight in to your experiment. PGSTAT204 with 10A Booster module † in combination with the ADC10M * 10A: x: ± 10 Volt y: ± 10 Amp; 20A: x: ± 10 Volt y: ± 20 Amp. Easily adapt even after installation Metrohm Autolab Modules 5 Low current Increase data accuracy by vastly decreasing the minimum measurable current of amplifi er module your experiment with the Autolab ECD. With a built-in amplifi er you can measure (ECD) current peaks down to a few picoAmps which opens new possibilities in sensor, corrosion and other research applications. Electrochemical An additional hyphenated measurement is possible with the Autolab EQCM by Quartz Crystal recording the change of the resonant frequency of a quartz crystal oscillator and Microbalance measuring the mass change per unit area. Module (EQCM) Multiplexer The Autolab Muliplexer module allows you to increase throughput with module (MUX) automated sequential measurements in the confi guration of your choosing. Your setup can be comprised of electrochemical cells, voltage measurements, or working electrodes. There is a manual option for additional testing. Analog fi lter and With the Autolab FI20 the analog fi lter gives you the ability to remove integrator module external noise and interference from the measured signal. You can smooth (FI20) your data using up to 3 different time constants giving you more accuracy and greater confi dence in your results. The integrator in the Autolab FI20 combines time and current for conversion to Coulombs which you can monitor in real-time for experiment versatility. Voltage and pH The pX1000 module provides simultaneous and highly accurate pH, measurement additional voltage and temperature measurements. A variety of experiment module (pX1000) confi gurations are possible with this module and you can even set your own safety cutoffs depending on your experiment requirements. Electrochemical The ultra-sensitive Autolab ECN allows in-depth understanding of localized Noise Module corrosion. This is possible by measuring, in-situ, diffi cult to detect stochastic (ECN) electrochemical noise as a function of time. NOVA provides seamless analysis of the measured noise at open circuit. PGSTAT302N with ECI10M module Instruments for a range of techniques and application areas Module Compatibility 6 T128N T302N T101* T204* TA TA TA TA PGS PGS M101* M204* PGS PGS Module Type Potential Application Segment • • Analog fi lter and integrator Electrocatalysis, Energy, Fundamental, Plating, module (FI20) Supercapacitors • • • • Batteries, Electrolysis, Energy, Fuel Cells, Booster 10A Supercapacitors • Batteries, Electrolysis, Energy, Fuel Cells, Booster 20A Supercapacitors • • Dual-channel ultra-fast sampling Electrocatalysis, Electroanalysis, Energy, Fuel Cells, module (ADC10M) Fundamental, Sensors, Supercapacitors • • • • • Dual-mode bipotentiostat module Electrocatalysis, Electroanalysis, Energy, Fuel Cells, (BA) Fundamental, Sensors Batteries, Corrosion, Electrocatalysis, Education, Energy, • • • • • Electrochemical impedance Fundamental, Plating, Sensors, Solar, Solid State, spectroscopy module (FRA32M) Supercapacitors • • Electrochemical noise module Corrosion (ECN)^ • • • • • Electrochemical Quartz Crystal Corrosion, Electroanalysis, Fundamental, Plating, Microbalance module (EQCM) Sensors • • High frequency impedance Fundamental, Solar, Solid State spectroscopy (ECI10M) • • Corrosion, Electroanalysis, Fundamental, Sensors, Low current amplifi er module (ECD) Solid State, Trace analysis • • • • • Batteries, Corrosion, Electrocatalysis, Electroanalysis, Multiplexer module (MUX) Energy, Fuel cells, Plating, Supercapacitors • • True linear scan generator module Electrocatalysis, Electroanalysis, Energy, Fuel Cells, (SCAN 250) Fundamental, Sensors, Solid State, Supercapacitors Corrosion, Electrocatalysis, Education, Electroanalysis, • • • • • Voltage and pH measurement Fuel Cells, Fundamental, Plating, Sensors, Solid State, module (pX1000) † Trace analysis Demo? Your Metrohm Autolab distributor can show you our instruments and help you build the right workstation for your research requirements. M204 with MUX, EQCM, pX1000, FRA32M, BA modules. www.metrohm.com/ how-to-fi nd-us * Current integrator included. † ECN and pX1000 installed together will incur an additional cost. Capture, explore, and understand your data with NOVA Powerful Data Acquisition and Analysis Software 7 Effortless Intuitive Software Intelligently Manage Your Laboratory • Users are comfortable with NOVA’s modern • Maximize your instrumentation with user interface and straightforward NOVA Scheduler to execute a series of navigation. procedures on multiple instruments. • NOVA has approximately 60 essential • Conveniently pre-configure calculations for electrochemistry procedures available for other lab users and the desired result will be preliminary exploration. available at the end of the measurement. • NOVA Procedure Editor enables you to design unique experimental procedures to create the research you imagined - without restrictions. Efficiently Handle Your Experiment and Data Additional Features Unique to NOVA • You can work flexibly and intervene in your • NOVA’s Virtual Instrument feature allows you experiment; your actions will be recorded to validate your procedures before you go to automatically. another lab or facility. • Once your analysis is optimized, NOVA Data to • NOVA Validation checks if your experimental Procedure will automate your measurements procedure will work with your instrument, including data handling. before you spend time on an experiment. • Simultaneous mathematical calculations on signals or data can be logged while the procedure is running. Want to #KnowNOVA? Check out YouTube/ MetrohmAutolab for a range of helpful NOVA user videos. Instruments for Eletrochemical Research Technical Specifications 8 Instruments PGSTAT101/M101 PGSTAT204/M204 PGSTAT128N PGSTAT302N • Modular no / yes one / yes yes yes • Maximum current ± 100 mA ± 400 mA ± 800 mA ± 2 A • Compliance voltage ± 10 V ± 20 V ± 12 V ± 30 V • Applied potential accuracy ± 0.2% ± 2 mV ± 0.2% ± 2 mV ± 0.2% ± 2 mV ± 0.2% ± 2 mV • Applied potential resolution 150 μV 150 μV 150 μV 150 μV • Minimum measured potential 3 μV 3 μV 0.3 μV 0.3 μV resolution (gain 100) (gain 100) (gain 1000) (gain 1000) • Maximum scan rate 1000 V/s with 1000 V/s with 1000 V/s with 1000 V/s with • Current ranges 10 nA to 10 mA 10nA to 100 mA 10 nA to 1 A 10 nA to 1 A (in 7 ranges) (in 8 ranges) (in 9 ranges) (in 9 ranges) • Current accuracy ± 0.2% ± 0.2% ± 0.2% ± 0.2% ± 0.2% of current range ± 0.2% of current range ± 0.2% of current range ± 0.2% of current range • Applied current resolution 0.015% of 0.015% of 0.015% of 0.015% of current range current range current range current range • Measured current resolution 0.0003% of 0.0003% of 0.0003% of 0.0003% of current range current range current range current range - at 10 nA range 30 fA 30 fA 30 fA 30 fA • Potentiostat bandwidth > 1 MHz > 1 MHz 500 kHz > 1 MHz • Potentiostat rise/fall time < 300 ns < 300 ns < 500 ns < 250 ns • Input impedance of > 100 GOhm > 100 GOhm > 1 TOhm > 1 TOhm electrometer // 8 pF // 8 pF // 8 pF // 8 pF • Input bias current @ 25 °C < 1 pA < 1 pA < 1 pA < 1 pA • Bandwidth of electrometer > 4 MHz > 4 MHz > 4 MHz > 4 MHz • iR-compensation current interrupt current interrupt current interrupt current interrupt and positive feedback and positive feedback and positive feedback and positive feedback - resolution 0.025% 0.025% 0.025% 0.025% • Electrode connections 2, 3 or 4 2, 3 or 4 2, 3, or 4 2, 3 or 4 • Front panel display - - potential and current potential and current • Analog outputs (BNC) potential and current potential and current potential and current potential and current • External voltage input - - yes yes • Analog integrator yes yes (optional) (optional) - time constants 0.01 s, 0.1 s, 1 s, and 10 s 0.01 s, 0.1 s, 1 s, and 10 s 0.01 s, 0.1 s, 1 s, and 10 s 0.01 s, 0.1 s, 1 s, and 10 s • Interfacing USB USB USB USB • A/D converter 16-bit with gains of 16-bit with gains of 16-bit with gains of 16-bit with gains of 1, 10, and 100 1, 10, and 100 1, 10, 100, and 1000 1, 10, 100, and 1000 • External input/output signals 1/1 1/1 2/2 2/2 • D/A converter 16-bit, 3 channels 16-bit, 3 channels 16-bit, 4 channels 16-bit, 4 channels • Digital I/O lines 12 12 48 48 • Dimensions (W×D×H) 9×21×15 cm3 15×26×20 cm3 52×42×16 cm3 52×42×16 cm3 • Weight 2.1 kg 4.5 kg 16 kg 18 kg • Power requirements 40 W 75 W 180 W 300 W FRA32M For accuracy of the FRA32M see the contour plot on the next page. The frequency range of the FRA32M is 10 μHz –1 MHz. Check out www.metrohm.com/autolabspecs for additional specifi cation information on all modules. The PGSAT302N is available in a fl oating option with ± 30 V compliance voltage (grounded). High Performance EIS Contour Plot 9 12 11 10 9 8 7 6 5 4 /VZ (Ohm) 3 0.3 ˚, 0.3 % 5 ˚, 2 % 2 LOG IZI 1 0 -1 -2 -3 -4 0,01 0,1 1 10 100 1000 10000 100000 1000000 Frequency (Hz) This contour plot is an accurate and precise representation of the performance of a 302N with FRA32M module in potentiostatic mode. • Autolab’s FRA32M module offers a wide • Initiate EIS using the NOVA software for range of measureable impedance suitable measurements and analysis including fi t and for applications from low impedance batteries simulation. to high impedance coatings and everything in • This module can be added to most Autolab between. instruments at purchase or later installed on- • Autolab offers phase change accuracy at a site by our service specialist. wide impedance range as well as the ability to modulate other outside signals. ECAT Workstation with PGSTAT302N with Rotating Ring Disk Electrode (RRDE). Frontcover image PGSTAT204 with NOVA software displayed. 8.000.5314EN - 2019-07 Dedicated to research www.metrohm.com/electrochemistry