NIRS DS2500 Polymer Analyzer The easy way to measure key quality parameters in polymers HIGHLIGHTS

− Robust and compact instrument

− Chemical and physical parameters



− Pre-calibrated for PE, PP, PET, PA 6



Measure chemical and physical parameters in less than a minute Melt Flow Index (MFI), viscosity, density, or moisture – with the NIRS DS2500 Polymer Analyzer you can measure key quality parameters of polymers in less than a minute, with no sample preparation at all. The DS2500 Polymer Analyzer package contains all you need to get started.

Start immediately thanks to pre-calibrations NIRS (Near-Infrared Spectroscopy) is a secondary method and requires product-specific calibration models. The DS2500 Polymer Analyzer contains pre-calibrations based on real product spectra for the most common solid polymers. Unpack, install, start measuring – that’s it – no prior model development needed.

Flexible choice of workplace Due to its robust and compact design, the DS2500 can be used in the laboratory or on the production floor alike. This simplifies your sample logistics and allows you to measure whereever you want.

Security against unwanted changes Only authorized users obtain access to the manager mode in our Vision Air software. This mode is used to manage instrument settings, create or change SOPs, and review data. Routine users do not have access and can only start a measurement.



Hardly any training required Our intuitive Vision Air software makes the DS2500

Polymer Analyzer easy to use. Shift workers will find the routine user mode so simple that hardly any time for familiarization is needed: Two clicks from selecting the method and starting the measurement to getting a clear pass/fail result is all it takes.

Pre-calibrations and parameter ranges for the NIRS DS2500 Polymer Analyzer Polymer

Part No.

Parameters

Range

PET

6.6072.310

Intrinsic viscosity

0.55–0.88 dL/g

Diethylene glycol

1.47–2.25%

Isophthalic acid

1.87–4.47%

Acid Number

1.1-6.2 mg KOH/g

Polyamide (PA 6)

6.6072.311

Relative viscosity

2.411–3.601 dL/g

Carboxyl end groups

29.5–130.4 mEq/g

Amine end groups

9.5–55.2 mEq/g

PE

6.6072.308

Relative viscosity

1.0–3.5 dL/g

Density

0.860–0.906 g/cm3

PP

6.6072.309

Melt Flow Rate

1.4–64.0 g/10 min.

ORDERING INFORMATION

2.922.1000

DS2500 Polymer Analyzer Comprised of:

2.922.0010

DS2500 Solid Analyzer 6.7425.100

DS2500 Iris

6.7402.050

DS2500 Large Sample Cup 6.7490.480

Lid for Large Sample Cup black 6.6072.208

Vision Air Complete

See below

Pre-calibration (choose 1) Pre-calibrations for Polymer Analyzer 6.6702.308

Pre-calibration for PE (Polyethylene) 6.6702.309

Pre-calibration for PP (Polypropylene) 6.6702.310

Pre-calibration for PET (Polyethylene Terephthalate) 6.6702.311

Pre-calibration for Polyamide (PA 6) Requires certified standards 6.4750.000

NIRS reflection standard, set of 2

Optional accessories 6.7402.030

NIRS mini sample cups, 10 pcs, incl. 100 disposable backs 6.7402.020

NIRS disposable backs for 6.7402.030, 100 pcs 6.7490.440

DS2500 Multisampler Cup, 15 mm (fits 9 vials of 15 mm diameter) 6.7490.450

DS2500 Multisampler Cup, 19 mm (fits 8 vials of 19 mm diameter) erisau

6.7490.460

DS2500 Multisampler Cup, 22 mm (fits 9 vials of 15 mm diameter) ubsidiaries.

-9101 H ts s

H

6.7490.470

DS2500 Multisampler Cup, 28 mm (fits 8 vials of 19 mm diameter)

, C nd i

G

6.7402.110

NIRS disposable glass vials 15 mm, 123 pcs etrohm a

etrohm A f M

6.7402.120

NIRS disposable glass vials 15 mm, 225 pcs y M

roperty o

6.7402.130

NIRS disposable glass vials 15 mm, 172 pcs itzerland b he p

w re t

6.7402.140

NIRS disposable glass vials 15 mm, 216 pcs n S

arks a

6.7402.200

NIRS vial cap 15 mm, 123 pcs rinted i, p radem

eam ll t

6.7402.210

NIRS vial cap 19 mm, 225 pcs

. AG

ieger T

6.7402.220

NIRS vial cap 22 mm, 172 pcs TS Ry R etrohm A

6.7402.230

NIRS vial cap 28 mm, 216 pcs ayout b

020-02 © M

hange | Lo c

Subject t 8.922.5003EN – 2

www.metrohm.com